Seattle Siding Contractor You Can Actually Trust
Siding Seattle homeowners trust. James Hardie Certified Installer. We replace siding on Seattle homes with materials built for this climate — fiber cement, cedar, metal, and LP SmartSide. No sales pressure. Written quotes. Work that lasts.
WA License #GPGENGC830KD — Verify
Hardie Certified Installer
5-Year Workmanship Warranty
5.0 on GoogleWe replace siding on Seattle homes on fixed-price contracts — James Hardie, cedar, LP SmartSide, and standing-seam metal, with real installed rates published on our pricing page. A full re-side typically takes 2–4 weeks on site. Free written quote after an on-site assessment, and Paul calls back.
By Paul Gubenya — Owner, James Hardie Certified Installer · WA License #GPGENGC830KD · MBAKS Member · Rated 5.0 on Google · (425) 344-9635
What Homeowners Say
Real reviews from our Google profile — unedited, from real projects.
“We recently had Paul with GP General repair a damaged corner protector and sidings. His estimate was reasonable, his availability was timely, and his job was excellent. Our home hadn’t been re-painted in a while and the paint had considerably faded, yet he was able to match the color perfectly. Now we know who to turn to when in need of another repair work.”
“GP General replaced LP siding on our garage. Paul was very thorough when he came out to do the estimate; he listened to my concerns and was able to work out solutions on the spot. His crew did a great job and were very courteous. They also were careful about cleaning up (I didn’t find any nails!). Really happy with the job and can recommend GP General.”
“I highly recommend GP General Corp for siding replacement. We recently had our wood siding replaced with James Hardie lap siding, and Paul and his team did an excellent job.”
A Siding Company Built for Seattle’s Conditions
Seattle gets over 38 inches of rain a year, and neighborhoods from Wallingford to Madison Park sit on mature lots where moisture finds every gap. Most siding companies in Seattle swap old boards for new ones and call it a day. We go further.
Before we quote a single board, we inspect the wall assembly — moisture barriers, flashings, sheathing condition. Replacing siding over a wet wall just delays the problem. We find the cause.
Every project gets a written scope of work with itemized pricing. We don’t do verbal estimates or “we’ll figure it out as we go.” You know exactly what you’re getting before we start.
We spec rainscreen systems on all fiber cement and wood projects. That 3/8″ drainage gap between the WRB and siding keeps walls dry through every Seattle winter.
Paul runs every assessment personally. You get honest recommendations, not an upsell pitch. If your siding can be repaired instead of replaced, we’ll tell you that too.
James Hardie’s Certified Installer certification requires training and quality standards above standard contractor requirements — so your Hardie warranty stays intact.
WA Contractor License #GPGENGC830KD — Verify. Fully insured. We pull permits when required and work within code — protecting your home’s resale value and your investment.
Siding Materials for Seattle Homes
Every Seattle home has different exposure, architecture, and budget. Here’s what we install most — and when each material makes sense.
The most popular choice for Seattle homes. HardiePlank lap siding and HardieShingle resist moisture, won’t rot, and hold paint longer than wood. Backed by a 30-year non-prorated warranty. As a Hardie Certified Installer, we meet the installation standards that keep that warranty valid.
Cedar is a natural choice for Seattle — dimensionally stable, naturally rot-resistant, and beautiful on Craftsman and bungalow styles common in Fremont, Queen Anne, and Capitol Hill. Requires proper back-priming and a rainscreen gap to maximize service life.
Modern standing seam and flat-lock panels for contemporary and mid-century homes across Seattle. Zero rot risk, excellent impact resistance, and long paint warranties. A strong choice for exposed west-facing walls and homes near Puget Sound.
Lunawood, Accoya, and Shou Sugi Ban for high-end Seattle waterfront, architect-designed contemporary, and custom builds where 50+ year performance and natural wood beauty matter more than cost.
Why Seattle Homes Fail Faster Than Most
The Pacific Northwest is one of the most siding-punishing climates in the country. It’s not just the annual rainfall — it’s the combination of mild temperatures, prolonged dampness, freeze-thaw cycles in winter, and homes that were built before modern moisture management techniques existed.
Hardboard Siding: Seattle’s Most Common Problem
Tens of thousands of Seattle homes built between 1980 and 2000 — in neighborhoods like Laurelhurst, Rainier Valley, Beacon Hill, and South Seattle — were sided with pressed hardboard products like Masonite and ABTco. These products swell, buckle, and delaminate when exposed to moisture, and they were never well-suited to a climate like Seattle’s. If your home has wavy, soft, or stained lap siding that chips when you probe it with a screwdriver, you likely have a hardboard problem.
Dry Rot Behind the Surface
Failed siding doesn’t just look bad — it lets water into the wall cavity. In Seattle’s mild, damp climate, that trapped moisture creates ideal conditions for dry rot in the sheathing, framing, and window trim. We assess the full wall assembly, not just the surface, so rot doesn’t get buried behind your new siding. When we find it, our Seattle dry rot repair crew rebuilds the framing to code before any new siding goes on.
Missing or Failing Moisture Barriers
Older Seattle homes — particularly pre-1990 construction in Wallingford, Madrona, and Montlake — often have no weather-resistive barrier (WRB) behind the siding, or one that has degraded beyond its service life. When we replace siding, we install a proper WRB, integrate it at windows and doors, and add a rainscreen gap to allow wall drainage and drying. This is code-compliant installation that actually protects your home.
Common Siding Failures We See in Seattle
- Hardboard siding swelling, buckling, and delaminating
- Cedar siding with failed paint, surface checking, and end-grain rot
- Fiber cement with improper caulking at windows and trim
- Vinyl siding with impact damage and faded color on south/west exposures
- T1-11 panel siding with delaminated edges and deep staining
- Missing kickout flashings allowing water intrusion at roof-wall intersections
What to Expect When You Work With Us
We keep the process simple and transparent. Here’s how a typical Seattle siding installation or full replacement runs from your first call to final cleanup.
Paul visits your home to inspect the existing siding, wall assembly, flashings, and trim. We probe for soft spots and moisture damage before recommending any material.
You receive a written scope of work and itemized quote. We walk through material options, colors, and profile choices — no pressure, just information to help you decide.
We handle the permit application when required (City of Seattle and most surrounding cities require permits for full siding replacement). We schedule around your timeline.
Our crew removes the old siding, installs a new WRB, adds rainscreen furring where specified, installs the new siding, integrates all flashings and trim, and back-primes every cut edge.
We do a full walkthrough with you at completion, pull the job permit inspection, and leave the site clean. Every nail strip, wrap scrap, and old siding board is hauled away.
What Does New Siding Cost in Seattle?
Siding replacement in Seattle typically runs $8–$22 per square foot installed, depending on the material, wall complexity, and condition of the existing substrate. Here’s a realistic range for each material type as of 2025:
| Material | Installed Cost (per sq ft) | Best For | Warranty |
|---|---|---|---|
| James Hardie Fiber Cement | $14–$20 | Most Seattle homes; moisture-prone neighborhoods | 30-year non-prorated |
| Western Red Cedar | $20–$40 | Craftsman, bungalow, character homes | Depends on maintenance |
| LP SmartSide Engineered Wood | $15–$21 | Authentic wood grain texture; comparable to fiber cement | 5/50-year limited |
| Metal Siding (Steel/Aluminum) | $30–$55 | Contemporary, mid-century, west-facing walls | 25–40-year finish warranty |
Prices cover removal of old siding, new weather-resistive barrier (WRB), rainscreen furring, material, priming, trim integration, and caulking. For a standard 2-story Seattle home with 1,500–2,500 sq ft of wall area. Complex rooflines, multi-story walls, or extensive trim push toward the higher end.
If you’re getting quotes under $8/sq ft in Seattle, ask whether the bid includes a new WRB, back-priming, rainscreen furring, proper flashings, and permit fees. Skipping these steps is how water gets in — and how a $15,000 siding job becomes a $40,000 structural repair in five years.
Still comparing Seattle siding contractors? Read our full Best Siding Contractor in Seattle buyer’s guide — seven criteria, eight phone-screen questions, and eight red flags.
Seattle Siding Contractor FAQ
How do I compare siding companies in Seattle?
How do I choose a siding contractor in Seattle?
How much does siding replacement in Seattle cost in 2026?
How do siding installers in Seattle handle the wet climate?
When do I need siding repair in Seattle versus full replacement?
How do I know if I need siding replacement or just siding repair in Seattle?
What is the best siding for Seattle’s rainy climate?
How long does a siding replacement project take?
Do I need a permit for siding replacement in Seattle?
What is a rainscreen system and do I need one?
My home has hardboard siding that’s failing. What should I replace it with?
Do you work in neighborhoods outside central Seattle?
How much does it cost to side a 2,000 sq ft house in Seattle?
- James Hardie fiber cement (with HydroGap Drainable WRB + vented rainscreen) — $14–$20/sf installed
- Cedar or Lunawood thermally-modified wood — $20–$40/sf installed
- Hardie Artisan or standing-seam metal — $30–$55/sf installed
What is the best time of year to install siding in Seattle?
What is the 30% rule in remodeling and does it apply to siding?
Siding Contractor — Across Seattle Neighborhoods
We serve homeowners throughout King and Snohomish Counties. In addition to full siding replacement in Seattle, we have dedicated service pages for nearby communities:
Don’t see your city? Call or text Paul — we cover most of King and Snohomish County and can confirm whether your address falls within our service area.
Done Dealing With Seattle Siding Contractors Who Don’t Call Back?
We’re a licensed Seattle siding contractor with a James Hardie Certified Installer credential, a 5‑year workmanship warranty, and a fixed-price quote you actually get to see before you sign. Paul picks up the phone.
Licensed & bonded in Washington State. Verify our L&I.
What Will Your Siding Project Cost?
Quick ballpark calculator based on real 2026 Seattle installed pricing. Not a binding quote — but an honest starting point.
Bellevue (15 min east) · Shoreline (15 min north) · Mercer Island (10 min east) Real projects from our crew — photos, specs, and the problems they solved.Neighboring service areas
Seattle siding contractor — see the work