Bellevue Siding Contractor — Somerset to Lake Hills, HOA-Ready
Bellevue siding jobs aren’t simple. HOA design review boards, hillside drainage on Somerset, LP Inner-Seal failures across Lake Hills, and homeowners who expect premium results with documentation to match. We handle the permits, the HOA submissions, and the installation — all to Hardie manufacturer spec. Paul comes out personally to every Bellevue assessment.
WA License #GPGENGC830KD 
Hardie Certified Installer 
5-Star Rated 
HOA ExperienceGP General Corp replaces siding on Bellevue homes — James Hardie, cedar, and standing-seam metal — and handles the HOA approvals and City of Bellevue permit paperwork Eastside projects usually require. Fixed-price contract, real installed rates on our pricing page, free written quote after an on-site assessment.
By Paul Gubenya — Owner, James Hardie Certified Installer · WA License #GPGENGC830KD · MBAKS Member · Rated 5.0 on Google · (425) 344-9635
What Homeowners Say
Real reviews from our Google profile — unedited, from real projects.
“We recently had Paul with GP General repair a damaged corner protector and sidings. His estimate was reasonable, his availability was timely, and his job was excellent. Our home hadn’t been re-painted in a while and the paint had considerably faded, yet he was able to match the color perfectly. Now we know who to turn to when in need of another repair work.”
“GP General replaced LP siding on our garage. Paul was very thorough when he came out to do the estimate; he listened to my concerns and was able to work out solutions on the spot. His crew did a great job and were very courteous. They also were careful about cleaning up (I didn’t find any nails!). Really happy with the job and can recommend GP General.”
“I highly recommend GP General Corp for siding replacement. We recently had our wood siding replaced with James Hardie lap siding, and Paul and his team did an excellent job.”
Siding Contractor & Installation Services for Bellevue Homeowners
As a James Hardie™ Certified siding contractor in Bellevue, GP General Corp installs fiber cement, cedar, metal, and premium wood cladding across the Eastside — from Somerset and Lake Hills to Bridle Trails, Newport Shores, Crossroads, Wilburton, Phantom Lake, and Eastgate. Whether you’re looking for a full siding installation in Bellevue or a careful repair on an HOA-controlled property, the assessment, quote, permit, and crew are all coordinated by Paul personally.
We are a Bellevue-area home siding company — not a national franchise, not a roofer-turned-siding-installer, not a sales company that subs out the actual install. Every Hardie HZ10 board, every flashing detail, every rainscreen furring strip on a Bellevue project is installed by Paul’s direct crew, to spec, with photographic documentation handed to you at completion.
New installs and full re-sides on homes from 1960s ramblers in Lake Hills to mid-century Eastgate splits to modern new builds in Newport Shores. Hardie HZ10, HardieShingle, HardiePanel B&B, cedar lap, standing seam metal, and premium wood (Lunawood, Accoya).
Targeted repairs when full replacement isn’t needed — rotten boards around windows, storm-damaged elevations, water-damaged trim, or HOA color-match patches. Always includes a moisture-meter assessment so you know what’s behind the visible damage.
Most Bellevue neighborhoods (Somerset, Bridle Trails, Phantom Lake, Newport Shores) require HOA design review. We handle the submittal — color samples, material specs, drawings — on your behalf and don’t schedule the tear-off until the approval is in writing.
Recent Bellevue projects:
Ready to talk about your project?
Free walk-through with Paul. No-pressure quote. Honest assessment of what your home needs.
Why Bellevue Homeowners Trust Us With Their Siding
You’ve probably gotten a few quotes for Bellevue siding contractor work already. You’ve heard the pitches. Here’s what makes us different — and why Bellevue homeowners don’t shop around the next time.
“Will they catch the damage I can’t see?”
Most siding fails because of what’s behind it — rot, failed flashing, moisture you can’t see from the curb. With 15+ years walking Eastside walls, we don’t guess. We probe, document, and re-engineer the wall assembly with drainable WRB, integrated flashings, and rainscreen ventilation built for Pacific Northwest weather.
Building Science First“I’m tired of high-pressure salespeople.”
No same-day discounts. No “this price is only good if you sign tonight.” We give you a free written assessment, a fixed-price contract, and the time to think it over. Most of our work in Bellevue comes from neighbor referrals — you don’t earn that doing it any other way.
No-Pressure Quotes“Will the warranty actually mean anything?”
A warranty is only as good as the install behind it. We’re a certified James Hardie installer, which means every panel goes up to manufacturer spec — gap, fastener, primer, every detail. That’s what keeps your 30-year Hardie product warranty enforceable if you ever need to use it.
Manufacturer-Backed“How do I know they won’t disappear after the check clears?”
Owner-run with 15+ years of Eastside siding experience behind it. WA License #GPGENGC830KD backed by a $30,000 contractor bond — both verifiable any time at L&I. You’ll work with Paul start to finish. Same person quoting, walking the job, and answering the phone in year five if a question ever comes up.
Owner AccountableSiding Materials for Bellevue Homes
How We Do It
From permit to final walk-through, here’s exactly how a re-side in Bellevue runs with GP General Corp.
We remove the existing siding completely and inspect every square foot of sheathing before anything new goes up. On Bellevue homes we look specifically for popped nails at the base of wall sections and dark staining below windows where failed caulk let water track down behind the siding. Any compromised sheathing is replaced with new plywood or OSB. This is where we find the hidden problems — failed flashings, missing WRB, saturated sheathing — that caused the old siding to fail in the first place.
We install Benjamin Obdyke HydroGap Drainable as our standard WRB on every job. The integrated drainage gap keeps any moisture that gets behind the siding moving down and out instead of sitting against sheathing. This matters for Bellevue because of ~38 inches annually (slight Cascade rain shadow), but heavier wind-driven rain off Lake Washington than the raw number suggests. Seams are lapped upper-over-lower (6” horizontal, 12” vertical), taped at joints, and integrated with window and door flanges using peel-and-stick flashing.
Head flashings above windows and doors. Kick-out flashings at every roof-to-wall intersection. Step flashings along rooflines. Proper flashing integration at every penetration — vents, hose bibs, electrical boxes, light fixtures. On Bellevue jobs we give extra attention to missing kick-outs at the top of dormer returns and the garage-to-house junction — the single most common rot failure we see on Bellevue re-sides. Failed or missing flashings are the number one cause of siding failure we see, so we upgrade these details beyond code-minimum wherever the install justifies it.
HardiePlank installed to James Hardie’s Best Practices manual for the HZ10 climate variant — the PNW-required product (HZ5 voids the warranty here). 1¼” corrosion-resistant nails, blind-nailed, ½” gap at trim, matched to your original reveal. We match original board exposure (often 6″ or 7″ reveal on mid-century homes) and keep trim details period-correct. ColorPlus pre-finish carries a 15-year color warranty; primed board gets field-painted within 180 days of install.
Every joint, butt-end, and penetration gets sealed with a high-grade elastomeric sealant rated for siding movement. The summer-wet winter-wet cycle widens joints over time, so sealant selection and bead size matter — we spec for the widest cycling range each Bellevue elevation will see, not the average. Joints are tooled, not just applied, for full bond contact on both faces.
We walk the property with you at the end of the job to make sure everything looks great and you’re happy with the final result. It’s a 20-point walk: caulk lines, paint touchups, downspout reattachment, gutter reset, and site cleanup. Permit sign-off from the City of Bellevue (or Snohomish/Skagit County on unincorporated properties) is documented and handed off to you.
What’s Happening to Bellevue Siding Right Now
Thousands of Bellevue homes built between 1985–1995 got LP Inner-Seal siding — an OSB-based product that absorbs moisture and crumbles. LP settled a $275–375M class action in the 1990s, but claims closed in 2002. If your Lake Hills or Crossroads home has bubbling, swelling, or crumbling at the joints, that’s what you’re dealing with. It needs to come off.
Somerset sits above 1,000 feet elevation. Runoff from the slope channels water toward foundations and lower siding courses. We see accelerated rot at the bottom two courses of homes on the downhill side. These homes need wider clearance between siding and grade, plus proper kickout flashings at every roof-wall junction.
Enatai borders the 320-acre Mercer Slough — Lake Washington’s largest remaining wetland. The ambient moisture from the slough keeps siding damp longer than anywhere else in Bellevue. Mid-century homes here need materials that don’t absorb water. Cedar works only with a rainscreen gap and proper ventilation behind the cladding.
Not sure where to start?
We’ll come out, look at your siding, and give you a straight answer — even if the answer is “you don’t need us yet.”
What Bellevue Homeowners Say
“Somerset CRC can be demanding. Paul prepared the entire submission — material specs, color samples, product data. Approved first review. The installation matched what was promised. Every phase was photographed.”
“Our Lake Hills home had LP siding from 1991. Three contractors just quoted replacement without explaining why it was failing. Paul showed us the moisture damage underneath, explained the LP settlement history, and gave us options. That kind of transparency is rare.”
“We needed Artisan series on our Enatai remodel to match the architect’s vision. Paul sourced the exact ColorPlus color, coordinated with our architect on the detail drawings, and the shadow lines came out exactly as designed.”
Read all reviews on Google — 5.0 star average
Bellevue Siding Questions
Are you a James Hardie certified siding contractor in Bellevue?
What does a typical siding installation in Bellevue actually include?
Why choose GP General Corp as your Bellevue siding company?
How do I find a trustworthy siding company in Bellevue?
How much does siding installation in Bellevue cost in 2026?
How does a home siding contractor in Bellevue handle HOA approval?
What siding service in Bellevue do you offer besides full re-sides?
Do I need a building permit to replace siding in Bellevue?
My Somerset HOA requires design review. How does that work?
My home has LP Inner-Seal siding. What should I do?
What does siding replacement cost in Bellevue?
How long does a full replacement take?
What is the best time of year to install siding in Bellevue?
Will my Bellevue home need extra moisture protection on west-facing walls?
How much does it cost to side a 2,500 sq ft Bellevue home?
- James Hardie fiber cement (with HydroGap Drainable WRB + vented rainscreen) — $14–$20/sf installed
- Cedar or Lunawood thermally-modified wood — $20–$40/sf installed
- Hardie Artisan or standing-seam metal — $30–$55/sf installed
Bellevue Neighborhoods We Work In
Hillside homes above 1,000 feet with 1960s–70s construction. The slope creates drainage issues that accelerate rot at lower siding courses. 20+ sub-HOAs with CRC design review. Views of Lake Washington and the Cascades come with west-facing weather exposure.
Borders the 320-acre Mercer Slough wetland. Mid-century moderns with angular lines and lake access. The wetland proximity creates 10–15% higher ambient moisture — siding here must handle a persistent moisture load most Bellevue neighborhoods don’t face.
Strict 20-foot height cap on all structures. Lot splitting prohibited. Average lot 12,000 sq ft. Protected view covenants for Lake Washington and Olympic sightlines. Any siding work that changes roofline profile runs into deed restrictions. Median price ~$4M.
Master-planned in 1954 on 1,200 acres. Original 1,000 sq ft ramblers. The biggest problem here: LP Inner-Seal siding installed between 1985–1996 that’s now crumbling. Class action is closed. The product needs full replacement — Hardie HZ10 is the standard upgrade.
Bellevue’s most diverse neighborhood with 10,000+ housing units spanning every decade. Original wood lap, vinyl, T1-11, hardboard, and newer fiber cement all coexist within blocks. Every project here is different — no cookie-cutter scopes.
The former industrial corridor is converting to mixed-use villages around East Link light rail stations. Single-family homes in adjacent streets are upgrading exteriors to keep pace with $800M+ in new development. Rising values justify the investment.
Done Dealing With Contractors Who Don’t Call Back?
Paul picks up the phone. Shows up when he says he will. Gives you a straight answer — even if that answer saves you thousands by telling you a full replacement isn’t necessary.
GP General Corp · Bellevue Siding Contractor · WA License #GPGENGC830KD · James Hardie Certified Installer · Look us up on WA L&I
Neighboring service areas
Kirkland (15 min north) · Redmond (10 min east) · Mercer Island (5 min south)