Arlington Siding Contractor — Stillaguamish Valley Homes, Rural Properties, New Construction
Arlington sits where the North and South Forks of the Stillaguamish River meet. That means river valley moisture, agricultural land with wide-open wind exposure, and a downtown with homes dating back to the early 1900s. The city has grown steadily — newer subdivisions on the north and east sides, older established neighborhoods near Olympic Avenue. We handle everything from historic homes in the original town to new builds on the outskirts.
WA License #GPGENGC830KD 
Hardie Certified Installer 
5-Star Rated 
River Valley ExperienceGP General Corp installs and replaces siding in Arlington — James Hardie, LP SmartSide, and cedar. North Snohomish County jobs get the same local crew as our Everett base, 25 minutes down I-5. Installed rates on our pricing page; free written quote after an on-site assessment.
By Paul Gubenya — Owner, James Hardie Certified Installer · WA License #GPGENGC830KD · MBAKS Member · Rated 5.0 on Google · (425) 344-9635
What Homeowners Say
Real reviews from our Google profile — unedited, from real projects.
“We recently had Paul with GP General repair a damaged corner protector and sidings. His estimate was reasonable, his availability was timely, and his job was excellent. Our home hadn’t been re-painted in a while and the paint had considerably faded, yet he was able to match the color perfectly. Now we know who to turn to when in need of another repair work.”
“GP General replaced LP siding on our garage. Paul was very thorough when he came out to do the estimate; he listened to my concerns and was able to work out solutions on the spot. His crew did a great job and were very courteous. They also were careful about cleaning up (I didn’t find any nails!). Really happy with the job and can recommend GP General.”
“I highly recommend GP General Corp for siding replacement. We recently had our wood siding replaced with James Hardie lap siding, and Paul and his team did an excellent job.”
Why Arlington Homeowners Trust Us With Their Siding
You’ve probably gotten a few quotes for Arlington siding contractor work already. You’ve heard the pitches. Here’s what makes us different — and why Arlington homeowners don’t shop around the next time.
Recent GP projects in the Seattle area:
- Mercer Island Hardie reside with R-5 exterior insulation + Shou Sugi Ban accent →
- Magnolia vertical cedar rainscreen with exterior insulation →
- Bellevue modern new construction — white ColorPlus Hardie + metal coping →
“Will they catch the damage I can’t see?”
Most siding fails because of what’s behind it — rot, failed flashing, moisture you can’t see from the curb. With 15+ years walking Snohomish County walls, we don’t guess. We probe, document, and re-engineer the wall assembly with drainable WRB, integrated flashings, and rainscreen ventilation built for Pacific Northwest weather.
Building Science First“I’m tired of high-pressure salespeople.”
No same-day discounts. No “this price is only good if you sign tonight.” We give you a free written assessment, a fixed-price contract, and the time to think it over. Most of our work in Arlington comes from neighbor referrals — you don’t earn that doing it any other way.
No-Pressure Quotes“Will the warranty actually mean anything?”
A warranty is only as good as the install behind it. We’re a certified James Hardie installer, which means every panel goes up to manufacturer spec — gap, fastener, primer, every detail. That’s what keeps your 30-year Hardie product warranty enforceable if you ever need to use it.
Manufacturer-Backed“How do I know they won’t disappear after the check clears?”
Owner-run with 15+ years of Snohomish County siding experience behind it. WA License #GPGENGC830KD backed by a $30,000 contractor bond — both verifiable any time at L&I. You’ll work with Paul start to finish. Same person quoting, walking the job, and answering the phone in year five if a question ever comes up.
Owner AccountableReady to talk about your project?
Free walk-through with Paul. No-pressure quote. Honest assessment of what your home needs.
Siding Materials for Arlington Homes
How We Do It
From permit to final walk-through, here’s exactly how a re-side in Arlington runs with GP General Corp.
We remove the existing siding completely and inspect every square foot of sheathing before anything new goes up. On Arlington homes we look specifically for high-cycle moisture damage at north-wall sheathing and dry rot behind shrubbery in the spacious lots typical of the area. Any compromised sheathing is replaced with new plywood or OSB. This is where we find the hidden problems — failed flashings, missing WRB, saturated sheathing — that caused the old siding to fail in the first place.
We install Benjamin Obdyke HydroGap Drainable as our standard WRB on every job. The integrated drainage gap keeps any moisture that gets behind the siding moving down and out instead of sitting against sheathing. This matters for Arlington because of ~50 inches annually — meaningfully wetter than the southern Eastside. Seams are lapped upper-over-lower (6” horizontal, 12” vertical), taped at joints, and integrated with window and door flanges using peel-and-stick flashing.
Head flashings above windows and doors. Kick-out flashings at every roof-to-wall intersection. Step flashings along rooflines. Proper flashing integration at every penetration — vents, hose bibs, electrical boxes, light fixtures. On Arlington jobs we give extra attention to head-flash on outbuildings and shop-to-house connections on larger-lot properties. Failed or missing flashings are the number one cause of siding failure we see, so we upgrade these details beyond code-minimum wherever the install justifies it.
HardiePlank installed to James Hardie’s Best Practices manual for the HZ10 climate variant — the PNW-required product (HZ5 voids the warranty here). 1¼” corrosion-resistant nails, blind-nailed, ½” gap at trim, matched to your original reveal. We increase WRB lap width on walls under tree cover where leaf litter and slow drying extend the moisture-loading window. ColorPlus pre-finish carries a 15-year color warranty; primed board gets field-painted within 180 days of install.
Every joint, butt-end, and penetration gets sealed with a high-grade elastomeric sealant rated for siding movement. The wetter winters drive bigger joint-cycling ranges than Eastside jobs, so sealant selection and bead size matter — we spec for the widest cycling range each Arlington elevation will see, not the average. Joints are tooled, not just applied, for full bond contact on both faces.
We walk the property with you at the end of the job to make sure everything looks great and you’re happy with the final result. It’s a 20-point walk: caulk lines, paint touchups, downspout reattachment, gutter reset, and site cleanup. Permit sign-off from the City of Arlington (or Snohomish/Skagit County on unincorporated properties) is documented and handed off to you.
The Siding Issues We Fix Most in Arlington
Arlington’s open agricultural terrain means siding takes more wind-driven rain than sheltered neighborhoods. We find water damage behind siding on the windward side of homes — usually the south and west walls. Proper flashing and tighter joint tolerances prevent this on new installations.
Vinyl looks fine from the outside while moisture destroys the wall behind it. We see this constantly in Arlington — homeowners think their siding is OK because it’s not visibly failing, but when we pull a section off, the sheathing is saturated. If your home has vinyl over original wood siding, it’s worth an inspection.
River valley homes with insufficient clearance between siding and grade get moisture wicking up into the bottom courses. We find this on nearly every tear-off in low-lying Arlington neighborhoods. New installations get proper 6” minimum clearance and continuous flashing at the base.
What Arlington Homeowners Say
“Our vinyl siding looked fine but Paul insisted on pulling a section. Found soaked OSB behind it. He fixed the sheathing, installed proper WRB, and put up Hardie. Two other companies would have sided right over the problem.”
“Rural property with major wind exposure. Paul’s crew paid extra attention to the west wall where we get hammered by storms. Flashing at every window, every transition. Professional from start to finish.”
“Fair price, clean work, and Paul actually returned our calls. He gave us a written quote the same day as the assessment. No pressure. No ‘limited time offer.’ Just honest work.”
Read all reviews on Google — 5.0 star average
Not sure where to start?
We’ll come out, look at your siding, and give you a straight answer — even if the answer is “you don’t need us yet.”
Arlington Siding Questions
Does the Stillaguamish River valley affect siding performance?
Our home has vinyl siding that looks fine. Should we still get it inspected?
How much does siding replacement cost in Arlington?
Do you work on rural properties and acreage homes?
What’s your labor warranty?
Do I need a permit to replace siding in Arlington?
How long does an Arlington siding replacement take?
What is the best time of year for siding installation in Arlington?
Arlington Neighborhoods We Work In
Arlington’s original core with homes from the early 1900s through the 1950s. Wood lap siding, some with multiple layers from past renovations. Full tear-off reveals what’s really going on underneath.
Rapid growth area with newer subdivisions. Builder-grade siding on 10–20 year old homes is starting to show flashing failures and moisture intrusion. Good candidates for proactive replacement before damage spreads.
Larger lots outside city limits with more wind exposure and often multiple structures. We handle main homes, shops, and outbuildings. Wind-driven rain detailing is especially important on these properties.
Properties near the river deal with the highest ground moisture in Arlington. Siding-to-grade clearance, proper WRB, and continuous base flashing are essential. We check moisture levels in the substrate before quoting.
Serving Arlington & Nearby Cities
Done Dealing With Contractors Who Don’t Call Back?
Paul picks up the phone. Shows up when he says he will. Gives you a straight answer – even if that answer saves you thousands by telling you a full replacement isn’t necessary.
GP General Corp · Arlington Siding Contractor · WA License #GPGENGC830KD · James Hardie Certified Installer
Neighboring service areas
Stanwood (15 min west) · Lake Stevens (15 min south) · Granite Falls (15 min east)